Can the CUBE connect to a Wifi network?

Can the CUBE connect to a Wifi network?

For connecting a CUBE to a wifi connection, we would recommend that they use an ethernet bridge for this, which is much more reliable than a USB wifi dongle. 
Some examples of these are: 

IOGEAR Ethernet-2-WiFi Universal Wireless Adapter, GWU637 - https://www.iogear.com/product/GWU637/

CUBE does not offer support directly for these products. 
    • Related Articles

    • Network Troubleshooting via techmenu

      If the CUBE is physically connected properly, but is not showing connecting in the Cubemc.net interface, you can connect a VGA monitor and USB keyboard to the CUBE to troubleshoot. You can also use this method to manually set an IP address, gateway, ...
    • CUBE Installation Guide

      CUBE Installation Guide GENERAL INFO Do not attempt to open or to disassemble the chassis (enclosure) of the CUBE. Please contact your dealer for service from a qualified technician. Do not install the CUBE in a location where it is exposed to: ...
    • Network Diagnostics via USB

      To view the current network diagnostics from a CUBE:  Unzip the attached USB Diagnostic Tools folder Copy "Manifest.xls" and "netdiag.txt" onto the root of a USB drive Insert USB drive into CUBE Wait about 1-2 minutes Remove USB drive, and insert ...
    • CUBE MOH Quickstart Guide

      Welcome to CUBE! This Quickstart guide will help you get started using your CUBE and the CUBE CMS. We've also released a video walk-through of the CUBE CMS which is available here! To login: Go to cubemc.net. Login with: your email address Password: ...
    • Schedule "Silence" to your CUBE

      There may be times when you want to have the CUBE play nothing at all. Perhaps to turn off all content playing at a customer's site, or some other similar reason.  This is quite easy to do:  Simply go to the CUBE in cubemc.net Click on the Link ...