Using the WebUI app
WebUI is an app that is installed on the CUBE to allow local control of the CUBE for skipping tracks, blocking tracks and artists, and changing "channels" (based on the channels you make available to the location) Accessing the App The WebUI app can ...
Can I change the CUBE Version?
Providers can change CUBE Version at anytime. To do so: Simply go to a Unit Click on Edit 3. Select the desired Version in the Version drop down. (If this drop-down is not yet available for you, please contact firstname.lastname@example.org to request ...
If your CUBE is experiencing a playback or connection issue, here are the initial troubleshooting steps you need to complete before contacting Support: Power must be plugged in. Is the blue light on the from the CUBE on? Is the power cord ...
What is the Output Impedance of the CUBE?
Standard output impedance is about 150ohm In terms of the actual voltage swing output by the unit, if you have on-board content recorded at full scale deflection, then a master volume of: 73% corresponds with the consumer-grade line level of ...
Network Diagnostics via USB
To view the current network diagnostics from a CUBE: Unzip the attached USB Diagnostic Tools folder Copy "Manifest.xls" and "netdiag.txt" onto the root of a USB drive Insert USB drive into CUBE Wait about 1-2 minutes Remove USB drive, and insert ...